<ins id="zvpdh"><meter id="zvpdh"><rp id="zvpdh"></rp></meter></ins>

      <nobr id="zvpdh"></nobr>

        <menuitem id="zvpdh"><delect id="zvpdh"><i id="zvpdh"></i></delect></menuitem>
        <menuitem id="zvpdh"></menuitem>

            <nobr id="zvpdh"></nobr>

            <menuitem id="zvpdh"></menuitem>
            會員登錄
            請登錄您的生意號,獲取電子名片。便于轉發分享!
            取消
            Tianda News
            會員登錄
            請登錄您的生意號,獲取電子名片。便于轉發分享!
            取消
            Coal burning boiler ZDFR
            Coal burning boiler ZDFR
            Product Category:Hot blast stove series
            Fluidized bed coal-fired hot blast furnace (abbreviated as boiling furnace), its combustion mode is that the coal is broken into particles less than 10mm, through the coal feeder uniform speed into the furnace fluidized bed; The high pressure wind of the blower is shot into the belly of the furnace through the isobaric bellows from the numerous holes of the hood on the air distribution plate, and the scattered wind is aggregated into the "air cushion" to hold up the coal particles and the charge is fluidized boiling combustion. The coal particles and slag jump at high temperature, friction, collision and cracking, from large to small until burned out; This kind of combustion has the characteristics of large contact area between air and fuel, high relative motion speed, long residence time of fuel in the fluidized bed, fast combustion speed, high degree of burnout, energy saving and environmental protection. Therefore, it has been widely used and developed rapidly in industrial kiln.
            Product Introduction

            1.Product introduction

            Fluidized bed coal-fired hot blast furnace (abbreviated as boiling furnace), its combustion mode is that the coal is broken into particles less than 10mm, through the coal feeder uniform speed into the furnace fluidized bed; The high pressure wind of the blower is shot into the belly of the furnace through the isobaric bellows from the numerous holes of the hood on the air distribution plate, and the scattered wind is aggregated into the "air cushion" to hold up the coal particles and the charge is fluidized boiling combustion. The coal particles and slag jump at high temperature, friction, collision and cracking, from large to small until burned out; This kind of combustion has the characteristics of large contact area between air and fuel, high relative motion speed, long residence time of fuel in the fluidized bed, fast combustion speed, high degree of burnout, energy saving and environmental protection. Therefore, it has been widely used and developed rapidly in industrial kiln.

            2.Fluidized bed uses

            Boiling furnace can be used for rotary dryer, vertical dryer, hammer dryer, indirect dryer, slag micro powder vertical mill, air sweep coal mill or coal powder vertical mill, fertilizer slurry granulator, powder drying tower, waste heat generation heat, material frying pan machine, all kinds of semi-finished product dryer and other equipment heating; Can be widely used in industrial raw materials or products drying, roasting. Such as: slag, clay, sludge, calcium carbide slag, compound fertilizer, industrial gypsum, gypsum board, iron fine powder, quartz sand, yellow sand, laterite ore, sulfur concentrate, siderite, zinc leaching slag, white carbon black, coke, coal powder and slime, etc.

            3.Main performance and characteristics

            1.Wide fuel adaptability, combustible value of more than 6270kJ/kg (1500kcal/kg) of all kinds of bituminous coal, anthracite, and even coal liver stone, chain row furnace slag, oil shale, coal slime, biomass fuel;
            2.Furnace combustion temperature (850~1100t), uniform operating temperature, stable heating;
            3.High combustion efficiency, burnout rate can reach more than 99%, furnace thermal efficiency is greater than 94%;
            4.Easy ignition, long compression time, intermittent compression fire up to 16~48 hours, no need to reignite the furnace;
            5.The outlet temperature of hot flue gas can be adjusted, the heating load can be adjusted broadly, and the outlet orientation of heating flue gas pipeline is flexible.
            6.Ash slag carbon content < 1%, not easy to soften or bond, good activity, suitable for use as cement mixing material, easy to comprehensive utilization;
            7.Clean combustion, low nitrogen oxide content in the flue gas, low cost curing desulfurization can be used in the furnace, so that the sulfur in the coal to solidify into the slag;
            8.Realize mechanical and electrical integration control, intelligent design of thermal control, low labor intensity;
            9.Long service life of furnace lining, less wearing parts, low maintenance cost.

            Product parameter introduction

            Technical parameters/models

            Heating capacity kJ/h

            Coal consumptionkg/h

            Furnace body dimension length × width × heightmm

            Furnace body weight t (reference)

            ZDFR-1

            1 x4.18x106

            143

            4272x3228x4400

            90

            ZDFR-2

            2x4.18x 106

            286

            4504x3460x4800

            110

            ZDFR-3

            3x4.18x 106

            429

            4968x3924x5000

            130

            ZDFR-4

            4x4.18x 106

            571

            5316x4156x5400

            150

            ZDFR-5

            5x4.18x106

            714

            5784x4852x5600

            180

            ZDFR-6

            6x4.18x10°

            857

            6016x4968x5800

            200

            ZDFR-8

            8x4.18x 106

            1143

            6132x5780x6300

            240

            ZDFR-10

            10x4.18x 106

            1429

            6480x6244x6800

            270

            ZDFR-12

            12x4.18x106

            1714

            7060x6940x7100

            300

            ZDFR-14

            14x4.18x 106

            2000

            7408x7404x7400

            350

            ZDFR-16

            16x4.18x 106

            2286

            7520x7404x7800

            400

            ZDFR-18

            18x4.18x106

            2571

            7980x6940x8600

            420

            ZDFR-20

            20x4.18x10。

            2857

            8100x7170x8940

            450

            ZDFR-25

            25x4.18x 106

            3571

            8330x7400x9360

            500

            ZDFR-30

            30x4.18x 106

            4286

            8930x7656x10020

            600

            ZDFR-35

            35x4.18x10'

            5000

            9140x7780x10500

            750

            Instructions for ordering


            Installation precautions


            Home

            Home

            News

            News

            About

            About

            Products

            Products

            Contact

            Contact

            人妻无码中文字幕免费视频蜜桃_亚洲精品无码专区久久_夜夜高潮夜夜爽35高清视频一_国产女人18水真多毛片18精品